1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Macro Function Commands »
  5. GS :

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS :

[Name]

Start/end macro definition

[Format]

ASCII
   
GS
  
:
Hex
1D
3A
Decimal
29
58

[Description]

Starts or ends macro definition.

[Notes]

  • Macro definition starts when this command is processed during normal operation and ends when it is processed during macro definition.
  • While the macro is defined, the printing is also executed.
  • If the macro definition exceeds the maximum number of data, the excess data is not stored. The maximum number of data to be defined as a macro is different, depending on the printer model.
  • If the printer processes this command again immediately after previously processing it, the printer clears the definition.
  • Macro is not defined when the power is turned on.
  • The defined contents of the macro are not cleared by ESC @. Defined content of the macro is effective until the printer is reset, or the power is turned off.
  • The macro is executed by GS ^.
  • The following commands cannot be contained in a macro. Do not use these commands while the macro is being defined.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Macro Function Commands »
  5. GS :

Jump to the top