1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 6>

Select your printer model

Parameters are refined by the selected printer.
  • EU-m30
  • TM-J2000
  • TM-J2100
  • TM-L90
  • TM-L90 LFC
  • TM-L100
  • TM-m10
  • TM-m30
  • TM-m30II
  • TM-m30II-H
  • TM-m30III
  • TM-m30III-H
  • TM-m30II-NT
  • TM-m30II-S
  • TM-m30II-SL
  • TM-m50
  • TM-m50II
  • TM-m50II-H
  • TM-P20
  • TM-P20II
  • TM-P60
  • TM-P60II
  • TM-P80
  • TM-P80II
  • TM-T20
  • TM-T20II
  • TM-T20III
  • TM-T20IIIL
  • TM-T20IV-L
  • TM-T20X
  • TM-T20X-II
  • TM-T70
  • TM-T70II
  • TM-T81III
  • TM-T82II
  • TM-T82III
  • TM-T82IIIL
  • TM-T82IV-L
  • TM-T82X
  • TM-T82X-II
  • TM-T83III
  • TM-T83IV
  • TM-T88IV
  • TM-T88V
  • TM-T88VI
  • TM-T88VII
  • TM-T90
  • TM-T100
  • TM-U220
  • TM-U220II
  • TM-U230

GS ( E   <Function 6>

[Name]

Transmit the customized setting values

[Format]

ASCII
   
GS
  
(
  
E
  
pL
  
pH
  
fn
  
a
Hex
1D
28
45
02
00
06
a
Decimal
29
40
69
2
0
6
a

[Range]

(pL + pH × 256) = 2
fn = 6
a: different depending on the printers

[Description]

Transmits the customized value specified by a.
a
Type of customized value
1
NV user memory capacity
2
NV graphics memory capacity
3
Paper width
5
Print density
6
Print speed
7
Thai character print mode
8
Default character code table
9
Default international character
10
Selection of the interface
11
Column emulation mode
12
Command execution (offline)
13
Specification for the top margin by backfeed
14
Selection of paper removal standby
20
Switchover time for a valid interface
21
Selection of primary connection interface
22
Display when interface is activating
70
Graphics expansion and reduction method
71
Graphics expansion and reduction algorithm
73
Graphics expansion and reduction ratio (when Manual Control)
97
Number of divisions of thermal head energizing
98
Power supply output
100
Paper autocutting after closing the roll paper cover
101
(ARP) Enabling/disabling reduction of excessive top margin
102
(ARP) Enabling/disabling reduction of excessive bottom margin
103
(ARP) Reduction ratio of line spacing
104
(ARP) Reduction ratio of line spacing where extra line feeds are included
105
(ARP) Reduction ratio of barcode height
106
(ARP) Reduction ratio of character height
111
Automatic replacement of Font A
112
Automatic replacement of Font B
113
Automatic replacement of Font C
116 – 195
The model-specific customized value: Value differs, depending on the printer models.
See GS ( E   <Function 5> for the type of customized value.
  • ESC/POS Handshaking Protocol is not required for this function.
  • ARP stands for Automatic Reduction of Paper.

[Notes]

  • This function works both in user setting mode and during normal printer operation.
  • The printer transmits the data below ("Header to NUL") with this function:
  • Send data
    Hex
    Decimal
    Number of bytes
    Header
    37h
    55
    1 byte
    Identifier
    27h
    39
    1 byte
    Value number (∗1)
    30h – 39h
    48 – 57
    1 – 3 bytes
    Separation code
    1Fh
    31
    1 byte
    Customized value (∗2)
    30h – 39h
    48 – 57
    1 – 5 bytes
    NUL
    00h
    0
    1 byte
  • (∗1)
    The decimal value for the customized value number (a; parameter of this function) is converted to ASCII character data and sent starting from the high order end.
    Example:
    If the a is 118, the "118" (expressed hexadecimally as 31h, 31h, 38h. Decimally as 49, 49, 56) is converted to 3-bytes data.
    (∗2)
    The customized value is determined by the value defined in GS ( E   <Function 5> .
    Example:
    When the customized value is 120, it is "120" expressed with 3 bytes of data (hex numbers: 31h, 32h, 30h / decimal numbers: 49, 50, 48).
  • Refer to GS ( E   <Function 5> for details of the [Value number] and [Customized value]
  • Even if the combination of settings requested in Function 5 is not possible, the printer transmits the settings made with Function 5. Note that this will differ from the memory capacity used during actual operation. The capacity of memory In fact can be checked by the following commands.
  • See [Notes for transmission process] for process sending data group.
 

Quick Access

  • [Name]
  • [Format]
  • [Range]
  • [Description]
  • [Notes]
ESC/POS® includes patented or patent pending commands. The contents must not be disclosed to third parties.


ESC/POS® Command Reference for TM Printers

  1. TOP»
  2. ESC/POS® Command Reference for TM Printers »
  3. Commands Arranged by Function »
  4. Customize Commands »
  5. User setup »
  6. GS ( E   <Function 6>

Jump to the top