Copying and Punching Holes

You can copy originals and add punch holes.

Note:

This feature is available with the optional finisher and punch unit.

Options

Important:

Adjust the data so that it is not printed at the punch position. If you punch on the printed area, it may cause punch failure or a paper jam.

1. Place the originals.

   Placing Originals

2. Select Copy on the home screen.

   Note:

   If there is an image at the punch position, secure a binding width of 18.5 mm or more before copying. You can set the binding margin from Binding Margin on the Advanced tab.

   For details on how to create a binding, see "Related Information" below.

3. Select the Basic Settings tab, and then select Finishing.

4. Select the punch holes position in the Punch option, and then select OK.

5. Tap .