Select a color setting whether you normally print in B&W or Color. Saved Settings applies settings you have made for saving to storage.
Paper Setting
Specify the paper source settings which you want to print on.
Reduce/Enlarge
Configures the magnification ratio of the enlargement or reduction. Tap the value and specify the magnification within a range of 25 to 400%.
Saved Settings
Applies settings you have made for saving to storage.
Auto
Automatically enlarges or reduces the data to fit to the paper size you selected.
Reduce to Fit Paper
Prints the data at a smaller size than the Reduce/Enlarge value to fit within the paper size. If the Reduce/Enlarge value is larger than the paper size, data may be printed beyond the edges of the paper.
Free Form(mm)
Specify the vertical and horizontal lengths of the paper to enlarge or reduce it.
Free Form(%)
Specify different magnifications for the vertical and horizontal lengths of the original to enlarge or reduce it.
Actual Size
Prints at 100 % magnification.
A3→A4 and others
Automatically enlarges or reduces the data to fit to a specific paper size.
2-Sided
Select 2-sided layout.
2-Sided
Select whether or not to print using 2-sided.
Binding
Select the binding position for 2-sided printing.
Multi-Page
Select the print layout.
Single Page
Prints single-sided data onto a single sheet.
2-up
Prints two single-sided data onto a single sheet in 2-up layout. Select the layout order.
4-up
Prints four single-sided data onto a single sheet in 4-up layout. Select the layout order.
Finishing
Finishing
Select Collate (Page Order) to print multi-page documents collated in order and sorted into sets. Select Group (Same Pages) to print multi-page documents by acquiring the same numbered pages as the group.
Eject Paper
Select Rotate Sort to print alternately in the portrait orientation from one paper source and the landscape orientation from another paper source. Choose Auto as the Paper Setting when using this feature.
If you select Shift Sort, you can offset each set of copies. Available when the optional finisher is installed.
Staple
Select the staple location. Available when the optional finisher is installed.
Punch
Select the location for the punch holes. Available when the optional finisher and the punch unit are installed.
Saddle Stitch
Specify these settings when you want to make the printouts saddle stitched.
This menu is displayed only when the saddle stich function is enabled.
Saddle Stitch
Allows you to make the printouts saddle stitched.
Sheets per Staple
Specify the number of page for saddle stiches.
Split
Allows you to split printouts when they are ejected.
Cover
Allows you to add the covers to the printouts.
Paper Setting
Select the paper source in which you loaded the paper for the covers.
Half Fold
Specify these settings when you want to make the printouts half folded.
This menu is displayed only when the half fold function is enabled.
Half Fold
Allows you to make the printouts half folded.
Sheets per Fold
Specify the number of page for half fold.
Split
Allows you to split printouts when they are ejected.
Cover
Allows you to add covers to the printouts.
Paper Setting
Select the paper source in which you loaded the paper for the covers.
Print Mode
Select whether to print outside or inside the half folded paper.
Tri Fold
Specify these settings when you want to make trifolded printouts.
This menu is displayed only when the trifold function is enabled.
Tri Fold
Allows you to make trifolded printouts.
Sheets per Fold
Specify the number of trifolded pages.
Print Mode
Select whether to print outside or inside the trifolded paper.
Open Orientation
Select the open orientation.
Booklet
Booklet
Specify these settings when you want to create a booklet from your printouts.
Booklet
Allows you to create a booklet from your printouts.
Binding
Select the binding position of the booklet.
Binding Margin
Specify the binding margin. You can set 0 to 50 mm as the binding margin in 1mm increments.
Cover
Allows you to add covers to the booklet.
Paper Setting
Select the paper source you want to use to print.
2-Sided
Select 2-sided layout.
Saddle Stitch
Specify these settings when you want to make the printouts saddle stitched.
This menu is displayed only when the saddle stich function is enabled.
Saddle Stitch
Allows you to make the printouts saddle stitched.
Sheets per Staple
Specify the number of page for saddle stiches.
Split
Allows you to split printouts when they are ejected.
Cover
Allows you to add the covers to the printouts.
Paper Setting
Select the paper source in which you loaded the paper for the covers.
Half Fold
Specify these settings when you want to make the printouts half folded.
This menu is displayed only when the half fold function is enabled.
Half Fold
Allows you to make the printouts half folded.
Sheets per Fold
Specify the number of page for half fold.
Split
Allows you to split printouts when they are ejected.
Cover
Allows you to add covers to the printouts.
Paper Setting
Select the paper source in which you loaded the paper for the covers.
Print Mode
Select whether to print outside or inside the half folded paper.
Print Selected Pages
Using Storage
Overview of the Storage Feature
About Storage
Types of Folders
Guide to the Folder Screen
Configuration of the Folder List Screen
Configuration of the File List Screen
Creating Folders
Saving Files to Storage
Saving to Storage Original Data to be Copied
Saving Data on a Memory Device to Storage
Saving Documents from a Computer to Storage (Windows)
Saving Documents from a Computer to Storage (Mac OS)
Using the Files in Storage
Printing Data from Storage
Printing from Storage by Creating a Booklet or Sorting
Printing from Storage by Creating a Booklet or Folding
Printing from Storage by Folding
Printing with Stapling from Storage
Printing with Punch Holes from Storage
Stacking Each Set of Copies by Sorting from Storage
Saving Data in Storage to a Memory Device
Sending Files in Storage by Email
Saving Files in Storage to a Network Folder or Cloud Services (Backup)
Menu Options for Printing or Saving
Menu Options for Print Settings
Basic Settings
Advanced
Menu Options for Send/Save
Using Data Saved in Storage with Web Config
Managing Folders and Files
Searching for Folders and Files
Deleting Files Stored in the Folder
Changing the Storage Period or Set to Never Delete